Identifying Camera Issues with Exposure Reference Sheets

Identifying Camera Issues with Exposure Reference Sheets

Our Exposure Reference Sheets are the feedback you've been waiting for, right in your inbox. They clearly show your exposures for each and every frame. But did you know you can also use them to identify camera issues?

Below are some of the common camera issues we see at PhotoVision—and how you can learn to identify them using your Exposure Reference Sheet:

Light Leaks


Notice the white markings across the top and bottom of the film? These are due to a light leak. If you have light leaks, your camera needs to be serviced.

Opened Camera Back


The section of white seen here is overexposure caused by the back of your camera being opened mid-roll.

Sticky Shutter


Take a close look down the right side of each frame, notice how dark it is? This is caused by a shutter sticking when it opens/closes. If it continues, your camera needs to be serviced.

Base Fog



When identifying base fog, you want to pay attention to the density of the spacing in between each frame. When a roll is affected by base fog, this spacing becomes a light gray as opposed to a dark black. You also want to note the contrast level within each frame—when a roll is base fogged, every frame will appear very flat with little contrast.

Film Wound Too Far When Loaded



All that unexposed space before the first frame is a sure sign this roll of film was wound too far upon loading (e.g. for medium format, it was wound past the word "start").

When your film is wound too far, your final frame will land at the physical end of the roll, which is a designated space for film processing + scanning. This space is used for clipping your film and for roll numbering. When a frame lands here, it can become distorted due to these processing needs.

Film Advance Issues


When evaluating the spacing in between each frame, you want them to be consistent. Notice how this roll has uneven spacing from frame to frame? This is a red flag that your camera has advancement issues. If the spacing is just slightly off, that is A-OK. But if the spacing begins to increase, your camera needs to be serviced.

Photos by Jacque Lynn Photography , Be Light Photography , Anna Peters , Kristen Kilpatrick , Courtney Leigh Photo .


    • Related Articles

    • Exposure Reference Sheets

      What are Exposure Reference Sheets? Your negatives are your road map to understanding the relationship between your exposures and your scans. Exposure Reference Sheets are included with every roll of Signature Process + Scan. They provide a thumbnail ...
    • How to Make an Exposure Ramp

      If you are new to film, transitioning to a new film stock or just haven't been happy with your exposures, we have a solution that will save you time, money and energy in achieving your ideal scans—exposure ramps. Exposure ramps help you learn a film ...
    • Exposure Triangle

      This tip comes from ishootfujifilm.com. Aperture, Shutter Speed and ISO. Aperture, Shutter Speed and ISO work together to determine the exposure (overall lightness or darkness) and overall aesthetic of a photograph. The "Exposure Triangle" is a way ...
    • Camera Manuals

      Knowing your craft means knowing your gear. And what better way to truly know your gear than by reading your camera's manual? We know this tip may seem a bit obvious, but here's the thing—you can learn a lot from your manual! Do you know how to ...
    • Reference Images

      Reference Images The Basics Reference images are 3-5 frames that exemplify your style in terms of: Skin tones Contrast Density (e.g. brightness) Saturation Our color technicians reference your reference images as they scan and color-check your film, ...